R33 Skyline GTR

SuperTec Racing

R35 Brembo Brake Conversion Kit - Full Kit - V2

R35 Brake conversion kit for the R32, R33, R34 GTR models. New revision 2 kits featuring lightweight brackets and full set of lightweight bells compared to our previous design with no compromise in strength and no more trimming of front hub brake line...

SuperTec Racing

RB26 Sump Capacity Up Kit (AWD)

Nissan RB26 compared to a modern 6 online does have a rather low oil capacity and if fitting a high flow oil pump or doing track and circuit racing then even with baffles and oil control modifications such as oil restrictor and head drains you will soon...

SuperTec Racing

RB26 Injector Ballast Delete

The Nissan Skyline GTR models R32-34 with the RB26 were factory fitted with low impedance fuel injectors. To minimise current draw on the ECU’s injector drivers and to protect the fuel injector itself, an injector resistor pack was used. When...

SuperTec Racing

Nissan Skyline AP Racing Radi-CAL ll Brake Kit (Front and Rear)

AP Racing Radi-CAL ll complete brake kit complete with 6 Pot front and 4 Pot rear calipers, 12 groove discs, AP Racing brake pads and a full fitting kit including bells, brackets and fasteners. The forged 4 and 6 Piston calipers incorporate AP's patented...

SuperTec Racing

Nissan Skyline AP Racing Pro 5000 R Brake Kit (Front and Rear)

AP Racing Pro 5000 R complete brake kit complete with 6 Pot front and 4 Pot rear calipers, 12 groove discs, AP Racing brake pads and a full fitting kit including bells, brackets and fasteners.  Pro 5000 R is an entry...

SuperTec Racing

Nissan Skyline Brake Air Guides (R32/33 GTR)

Brake air guides for the Nissan Skyline R32/33 GTR. These are made from 2.1mm aluminium sheet so not to deflect or warp at high speed. Optimises air flow to the brake discs for improved cooling over the smaller factory air guides. These are based on the...

SuperTec Racing

N1 - Nismo Billet Spline Drive Gear Kit + Billet Back Plate

Supertec Racing Spline kits for Nissan RB and Toyoya UZ-FE engines. Spline drive engagement provides full 360 degree rotational support and prevents breaking of the inner gear as is so often found with the factory flat drive setup. Gear and collars are...

RB26 Twin Turbo PTFE Stainless Steel Oil and Water Lines

Nissan Skyline RB26 twin turbo PTFE lined stainless steel oil and water lines including water returns. Fits most stock replacement Garret GT28xx series low mount turbos including 797160-X, 836026-X. Contact us if you are unsure. Each hose is pressure...

SuperTec Racing

Hitachi Nissan R35 GTR Ignition Coils- Set Of 6

Genuine Hitachi R35 Ignition Coils for Nissan R35 GTR - (VR38) We only sell Genuine Hitachi R35 GTR coils, we do not under any circumstances deal with cheap Chinese made coils or sell 370z coils as R35 coils - all part numbers can be verified. Where...

SuperTec Racing

RB R35 VR38 Coil Bracket Kit - Nissan (RB20 RB25 RB26)

Supertec Racing RB R35 VR38 coil bracket kit - (Rev 5) for Nissan Skyline and it’s engine models RB20, RB25 and RB26. An ideal upgrade to improve and modernise the RB series engine’s ignition setup. Modern coil packs such those found in...

Nitto

Nitto RB26 Stroker Kit

NITTO's RB26DETT  Stroker Kit consist of an increased stroke crankshaft made from solid 4340 billet steel, 4340 one piece forged billet steel I-beam connecting rods and a unique JE/Nitto forged piston set along with upgraded thick wall gudgeon pins...

Nitto

Nitto RB26 Intake/Exhaust Gasket Kit

NITTO’s RB26DETT metal gasket set has been developed as a high performance alternative to the OEM paper style gaskets normally found on standard engines and as part of the Nissan range of gaskets. NITTO now offers a practical solution to a long...

Nitto

Nitto RB26/30 Headgasket

NITTO DBS Drag Series multi layer metal head gaskets offer unparalleled performance and superior sealing where it counts. Using only the highest quality materials ensures you get the best possible seal. Proven reliability makes NITTO DBS Drag series head...

Nitto

Nitto RB26 Complete Engine Gasket Kit (Minus Headgasket)

NITTO’s range of Complete Engine Gasket Sets consists of premium OEM quality components providing an "uncompromising" sealing solution for the professional engine builder. All kits come minus the head gasket allowing the engine builder to select a...

Nitto

Nitto RB26 Pistons

World renowned piston manufacturers JE Pistons along with NITTO Performance Engineering have combined craftsmanship and knowledge to forge the JE / NITTO Sports Compact range of pistons. All pistons are designed to NITTO’s stringent standards and...

Nitto

Nitto RB Oil Pump

The NITTO RB series high volume oil pump is a high quality performance aftermarket oil pump that will suit Nissan RB20, RB25, RB26 and RB30 engines. Oil flow and pressure is dramatically increased over that of the factory oil pump which is critical in...

Nitto

Nitto RB26 Crankshaft

NITTO 4340 Billet Steel crankshafts are manufactured from high quality true billet round bar stock. Most other aftermarket crankshafts are manufactured using cast forged material, which is a much cheaper manufacturing process and hence carry a cheaper...

Nitto

Nitto RB Crank Collar

NITTO’s RB series crankshaft collar was specifically developed to be used on RB series crankshafts that have the factory narrow oil pump drive on the crankshaft snout. Most earlier RB series engines have the crankshafts with the narrow oil pump...

Nitto

Nitto RB25/26 I Beam Connection Rods

NITTO I-beam connecting rods are manufactured using the highest quality one piece 4340 forged billet steel round stock and have been designed specifically for extreme motorsport use. Its design lends itself to being slightly lighter and superior in...

Nitto

Nitto RB25/26 H Beam Connecting Rods

NITTO H-beam connecting rods are manufactured using the highest quality one piece 4340 forged billet steel round stock and have been designed as a first stage upgrade for the price conscious racer.The simpler manufacturing process of the H-beam...

Nitto

Nitto RB26 Timing Cover

NITTO now offers a Clear Timing Belt Cover to add the finishing touch to your NITTO spec engine or show off your Adjustable Nitto Cam Gears, adding that customized look to your engine bay. Cover is made from durable polycarbonate and will work on all...

Nitto

Nitto Head Drain

NITTO's oil drain for the Nissan RB20/25/26 head helps alleviate the all too common issue of excessive oil build up in the head area. This problem is especially evident when the engine has a high volume oil pump installed. Whether you look at this...

Borg Warner

Borg Warner AirWerks S500SX Turbocharger

Engineered specifically for drag racing, pulling and road racing, AirWerks turbochargers have earned a reputation as robust, brute-force boosting devices. Features: • Twin hydrodynamic journal bearings• Extended Tip Technology...

Borg Warner

Borg Warner AirWerks S400SX4 Turbocharger

Engineered specifically for drag racing, pulling and road racing, AirWerks turbochargers have earned a reputation as robust, brute-force boosting devices. Features: • Twin hydrodynamic journal bearings• Extended tip technology...

Borg Warner

Borg Warner AirWerks S400SX3 Turbocharger

Engineered specifically for drag racing, pulling and road racing, AirWerks turbochargers have earned a reputation as robust, brute-force boosting devices. Features: • Twin hydrodynamic journal bearings• Extended tip technology...

Borg Warner

Borg Warner AirWerks S400SX Turbocharger

Engineered specifically for drag racing, pulling and road racing, AirWerks turbochargers have earned a reputation as robust, brute-force boosting devices. Features: • Twin hydrodynamic journal bearings• Extended Tip Technology...